Find a trusted window repair service near you

I have an old house in Langford. The timber frames seem worn off and need repair or replacement.

Need someone to supply and install a fixed window glass as in the photos, the cut out for window installation on the brick wall is about 740W x 1050H mm, may need a new outside window sash reinstalled, fully sealed and water proofed. Any questions please feel free to discuss.

Handyman for various jobs - Install small house name plate on external wall - Rehang two very large wardrobe built-in doors that have come off - Two old windows don't open - help to reopen these please Photo shows old wardrobe door door hanging Window that doesn't open House name plate to be installed

Need metal flyscreen removed from the 4 windows in my office space. See attached puc for reference.

Window won’t open anymore due to expanded wood in winter time. Need someone to come by and sort it out.

2x external window roller shutters are stuck. Manually raise and lower with internal handle. Looks like cords may need to be replaced. 2nd storey windows. Need ladder

A new lock for a side door installed. window opener replaced or fixed (old school winder type) Please include the cost of parts in your offer. My asking price is labour only

I have 2 wind out windows. 1 on the first floor, and 1 on the 2nd floor. Both are unable to close properly and dislodge on one side.

There are 3 windows which are sliding down type with spring loaded mechanism. Those do not close fully anymore. Please check photos and let me know if you need more information.

Fix / change my broken window Today or tuesday Ps : i had a scammer coming to my house last week just to changd it and break it again and disapear So please serious people

Repair screen door/window mesh.

Hello! 🙂 I would like someone to please replace the fly screen on 2 doors and a small window due to cat damaging them. You would be required to bring the mesh and tools. Suburb is Bracken Ridge (North Brisbane). Measurements are: - Front screen door = 70cm x 195cm (standard size) - Rear screen sliding door = 83cm x 195cm (standard size) - Small Laundry window = 24cm x 81cm. Must be completed before the 16th of May. Please see below availability to have this job completed. Please let me know in your offer if you can make one of these times suite. - Monday 6th between 6pm-8pm - Wednesday 8th between 4.30pm-7pm - Thursday 9th between 8.30am-11am - Friday 10th between 8.30am-10.30am - Monday 13th between 8.30am-1.30pm - Tuesday 14th between 3.30pm-7.30pm - Wednesday 15th between 8.30am-5pm

The window above my front door wouldn't close and was in a poor state. It needs taking apart, fixing rotten wood, painting and putting back together so it closes.

The winder (handle) has come out of the fixture on our window. We can’t re-thread it and need some help reattaching it or replacing the fixture, if need be.

Have a fly wire screen that was taken out to change the mesh wish we have done, but am having trouble putting it back in. Need help with this task.

4 x A1 window decals for event. Need professional help!

Need To install fly screens on 2windows

URGENT HELP REQUIRED - We need to reinforce or reinstall around 15 hooks urgently (using the fastener style hooks) for displaying a hanging installation for our new store opening tomorrow (Saturday) morning. For one of the installations (see in picture), there are 8 hooks to be used - the current ones are too loose and need to be reinforced using the fastener or cup style hooks, whatever is appropriate. There are 2 other installations that require 4 hooks each (same style) - however those installations are much smaller and lighter than the ones seen in the picture. We need this done urgently (today morning / afternoon) - please contact me asap and I will respond straightaway. Regards, Dushyant

Replace 1 broken window winder and potentially 2 more pending price. Fix 1 broken toilet seat, maybe 2 pending price; option for soft close seats and also a family seat in one (for kids).

Remove two metal hoods and install two new metal window hoods from Woodworkers. It's a one piece of metal hood that includes the flashing which needs to be placed under weatherboard walls and then screwed in with the right accessories to ensure longevity. Size: 95cm width Please note that you'll need your bring any necessary tools and joining accessories (screws and etc) as the hoods are being delivered without any accessories. - Please only quote if you have %100 confidence. - Access is easy, ground level. Woodworks generic explanation for install- Colorbond hoods can only be connected by pop rivet joints Metal hoods should clear the external jambs of joinery by approximately 30mm and are usually simply screwed directly to the chamferboards with dome head screws & nylon washers to ensure electrolytic compatibility with the hood metal. Remember water cannot flow over zincalume onto galvanised fixings. Because metal hoods are so light they can easily be installed by two people in a fully assembled state. The metal hood needs to be positioned to avoid interference with the window opening (especially with casements) and ensure pedestrian traffic cannot collide with the hood. Ensuring the hood and window are parallel, the top flange of the hood is usually slipped under the chamferboard or weatherboard overlap and the sides are screwed down with to 4 screws each side. 100) AA •